Wreck diving is commonly associated with recreational diving and exploration of shipwrecks. Shipwrecks are still the best place to wreck dive, but there is an increasing trend to dismantle old ships in order to make artificial reefs. Continue reading to learn more about wreck diving. These are some important tips to get you started in wreck diving. First, get your equipment ready! There are many kinds of equipment. The difference between a dangerous and fun dive is how you choose your gear.
Non-penetration wreck diving
These are the basics to help you get started with scuba diving. First, wrecks are often a place to fish, so divers should be aware of any lines or fishing nets. The underlying terrain may have sharp edges, and currents could transport them from the place they want. While it's not advisable to dive in this type of terrain, non-penetration wreck diving is a good option.
Technical penetration diving may seem easier than it is, however, there are still dangers. The dangers of diving in the light zone include overhead hazards, proximity to the wreck structure, and the possibility of getting caught in tight passageways. Silt and mud can cause visibility problems and make orientation extremely difficult. These dangers can be avoided by non-penetration dives. The diver must stay within the light zone, and only move to the exit point.
A view of a sunken ruin
A survey of a sunken wreck requires special equipment, as well as a deep understanding of maritime history. Depending on the time and accuracy required, the survey method may be a combination of a GPS position fix, a tape baseline, or offset and ties measurements. Sonar and other non-destructive techniques can all be used to survey a sunken shipwreck.
A shipwreck inspection is intended to locate and identify the ship. It should also include information about navigational hazards and environmental conditions. The survey report should include a summary of the vessel's structural features, the incident that sank it, and any prior archeological surveys. Finally, it should be possible to plot the site on a nautical chart in order to make accurate measurements.
Equipment needed
It is important to know the details of a shipwreck before diving. Know its layout, its key points, and its hazards. These details will assist you in preparing for your dive. Below, you'll learn about the essential equipment that you'll need to dive a shipwreck. Before diving, make sure you read the checklist and bring it along to the dive site.
Proper buoyancy control is crucial to not lose your way in the darkness. To wreck dive, it is essential to maintain good buoyancy. Deep water diving is dangerous without a weight belt and a buoyancy tank. If you are looking for a great dive, a weight belt is essential. These two pieces are essential for your safety and the safety of all others.