Wreck diving can be associated with recreational dives and exploration of shipwrecks. While shipwrecks are the traditional sites for wreck diving, an increasing trend is to scuttle retired ships to create artificial reef sites. To learn more about wreck diving, read on. Here are some key tips to help get you started. First, get your equipment ready! There are many kinds of equipment. Getting the right kind of gear can make the difference between a fun and dangerous dive.
Non-penetration wreck diving
There are some things that you should know if you're new to scuba diving or want to learn more about non-penetration dives. First, wrecks can be used as a fishing spot, so divers need to be aware of lines and nets. You should also be aware that the terrain underneath can have sharp edges. The currents can carry divers away from what they are looking for. Non-penetration wreck diving, while not advised, is an alternative.
Although it might sound easier, technical penetration diving has its own set of hazards. Light zone diving poses dangers due to overhead hazards, proximity of the wreck structure, and possible trapping in narrow passageways. Silt and mud may also be present in some wrecks, which can greatly reduce visibility and make it difficult for divers to keep their eyes open. Non-penetration wreck diving allows the diver to stay within the zone of light and move to an exit point.
A view of a sunken ruin
A survey of a sunken wreck requires special equipment, as well as a deep understanding of maritime history. Depending upon the time and accuracy needed, the survey method can include a GPS fix, a tape baseline or offset and tie measurements. A variety of techniques are available to survey a sunken ruin, including sonar and non-destructive methods.
The objective of a shipwreck survey is to identify the vessel and its location. It should also include information about navigational hazards and environmental conditions. The survey report should include a description of the vessel's structures, the incident that resulted in its sinking, and any other archeological studies. To make precise measurements, it should be possible plot the site on a chart.
Equipment necessary
Before diving a shipwreck, you should know about it. Know its layout, its key points, and its hazards. Knowing these things will help you prepare for your dive and minimize the chances of an accident. Below you'll find the information you need to dive in a shipwreck. Before diving, make sure you read the checklist and bring it along to the dive site.
Proper buoyancy control can prevent you from losing your way in dark waters. For wreck diving, you need to have good buoyancy control. It's not recommended to dive in deep water without a buoyancy control tank and a weight belt. A weight belt and a regulator are necessary if you want to have fun diving. These two pieces are essential for your safety and the safety of all others.