Wreck diving can be associated with recreational dives and exploration of shipwrecks. Wreck diving is still a popular activity, with shipwrecks being the main site. However, it is becoming more common to use retired ships to create artificial coral reefs. Learn more about wreck diving by reading on. Here are some essential tips to get you started. First, get your equipment ready! There are many types of equipment. You can make the difference of a fun or dangerous dive by choosing the right gear.
NON-PENETRATION WRECK DIVING
Here are some tips for beginners who want to dive non-penetration. First, wrecks are often places to fish. Divers need to be aware if there are lines or nets. Also, divers should be aware of the terrain beneath them. Currents and sharp edges can cause them to drift away from their desired destinations. This type of terrain is dangerous and it's best to avoid wreck diving.
Although it might sound easier, technical penetration diving has its own set of hazards. Avoiding the light zone means you can be exposed to overhead hazards, close proximity to the wreck structure and risk getting trapped in narrow passageways. Furthermore, the presence of silt and mud in some wrecks can severely compromise visibility and make orientation very difficult. Non-penetration wreck diving allows the diver to stay within the zone of light and move to an exit point.
Viewing a sunken shipwreck
In addition to traditional surveys, surveying a sunken wreck requires specific equipment and a thorough understanding of the maritime history of the area. The survey method used depends on how accurate and time-consuming it is. It may include a GPS position fix or a tape baseline. Or offset and ties measurements. A variety of techniques are available to survey a sunken ruin, including sonar and non-destructive methods.
A shipwreck survey aims to identify the vessel as well as its location. It should identify historical events, navigational hazards, and environmental conditions. A summary of the vessel's structure, the incident that caused it to sink, and any previous archeological surveys should be included in the survey report. To make precise measurements, it should be possible plot the site on a chart.
Equipment required
You should be familiar with the shipwreck before you dive it. Know its layout, its key points, and its hazards. This will allow you to prepare for your dive and decrease the risk of getting into an accident. You'll find information about all the equipment required to dive a shipwreck. Make sure to read through this checklist before diving and bring it with you to the dive site.
Proper buoyancy control is crucial to not lose your way in the darkness. For wreck diving, you need to have good buoyancy control. It's not recommended to dive in deep water without a buoyancy control tank and a weight belt. For fun diving, you will need a weight belt as well as a scuba regulator. These two pieces ensure safety for you and your fellow divers.